Usb adapter 5615 raytown road • kansas city, mo 64133 u.S.A. Tel.: 816-353-4787 • fax: 816-358-5072 email: flexcam@ken-a-vision.Com • www.Ken-a-vision.Com 800-171-318.
13 table of contents introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 professional services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 product registration . . . . . . . . . . . . . . . . . . . . . . . . ....
12 1 introduction the usb adapter is the ultimate usb video connector for cameras or other video devices with built-in video and audio ports. The usb adapter provides a convenient, easy way to capture video, audio, or still images through your computer. The usb adapter features a video pass-through ...
11 selecting ntsc or pal video the default usb adapter setting is ntsc. To select pal video 1. Launch videoimpression 1.6 (see figure 10). 2. Click new and then click the capture icon on the next screen. 3. On the video capture screen, click the source icon (see figures 11 and 12). This will open a ...
10 you cannot change the video source in photostudio. However, the changes made in videoimpressions will be applied to photostudio figure 12. Video capture screen figure 13. Video source window arcsoft software system requirements usb adapter • pentium ii 350 mhz or higher, powerpc mac or higher • w...
9 to install on a mac os 1. Double-click the videoimpression 1.6 installer (see figure 7) and follow the onscreen prompts. 2. When videoimpression is finished installing, double-click the photostudio installer and follow the onscreen prompts. 3. Restart your computer. Selecting the correct video sou...
8 arcsoft software the usb software and driver disk includes two programs for video capture and editing: videoimpression 1.6 and photostudio 5. Please note that the videoimpression 1.6 version on this cd is manufactured specifically for ken-a-vision ® products and does not support still captures. If...
7 connecting the usb adapter to a video source use either a composite video cable or an s-video cable to connect the usb adapter to the video source such as a ken-a-vision ® camera or a vcr. To a video monitor use a composite video cable to connect from the video pass-through jack on the usb adapter...
