Ken A Vision usb adapter Instruction Manual - page 8
7
Connecting the USB Adapter
To a video source
Use either a composite video cable or an S-Video cable to connect the USB Adapter to
the video source such as a Ken-A-Vision
®
camera or a VCR.
To a video monitor
Use a composite video cable to connect from the video pass-through jack on the USB
Adapter to the composite (RCA) jack on the TV, monitor, or other display device. This
connection allows you to view the video as it is recording.
To use the video pass-through connection, the connection from video source to
the USB Adapter must be composite. If you are using an S-video connection, you
will not be able to use the video pass-through option.
To an audio source
Use the stereo audio in jack to route an audio signal to the computer
6
To install USB drivers on a Mac
The USB Adapter is compatible with Mac OS 8.6 through 9.2.2
1. Insert the Software and USB Driver Disk into the CD-ROM drive.
2. Double-click the ArcSoft icon to pen the CD content window.
3. Double-click the USB Adapter 2.0 Installer icon.
4. Click Install. When the drivers are installed, restart the computer.
5. Plug the USB Adapter into a USB port on the Mac.
Getting Started
Figure 7. Contents of USB Software and Driver Disk
Audio
Composite
Video
S-Video
Video
Pass-Through
USB
Figure 8. USB Adapter connection diagram
Getting Started