Vision viewer instruction manual 7890b 7890p 7890um.
3 thank you for your purchase of a ken-a-vision vision viewer™! You have acquired an easy to use, reliable solution for any presentation need, be it classroom or conference room. Images captured by your camera will be transmitted directly to your tv/monitor, projector, or vcr (7890b or 7890p) or thr...
4 connecting the vision viewer™ to output device 7890b and 7890p (analog/video device) connecting the video/power cable your video/power cables are pre-attached to the vision viewer™ camera. Simply connect the video composite (rca type) cable (yellow connector) into the "video-in" on your tv/monitor...
5 focusing: the focusing ring located on the camera head is a rubber knurled focusing system with 6mm lens. Simply turn the focusing ring until you have obtained a crisp clear image. Note: the lens is permanently attached and may not be removed. Use care when reaching the optimal focal distance, do ...
6 lighting: your vision viewer™ operates using ambient, room light. If using the camera in a severely darkened room, supplement the light entering the camera by using a penlight, flashlight or small lamp near the camera, so that there is more local input light for the camera to work with. Never poin...
7 camera complies with class a and b, part 15 of the fcc rules. Use only ken-a-vision video flex parts. The power supply and charger are made exclusively for the video flex. Failure to use non-video flex parts will void your warranty. Information to the user changes or modifications not expressly ap...
5615 raytown road • kansas city, mo 64133 u.S.A. Tel.: 816-353-4787 • fax: 816-358-5072 email:info@ken-a-vision.Com • www.Ken-a-vision.Com ins-vv ken-a-vision reserves the right to make design improvements and other changes in accordance with the latest technology. There is no obligation to make cha...
