Vision viewer instruction manual 7890b 7890p 7890um.
2.
3 thank you for your purchase of a ken-a-vision vision viewer™! You have acquired a high resolution solution to any presentation need, be it classroom or conference room. Images captured by your camera will be transmitted directly to your tv/monitor, projector, or vcr (7890b or 7890p) or through you...
4 connecting the vision viewer™ to output device 7890b and 7890p (analog/video device) connecting the video/power cable your video/power cables are pre-attached to the vision viewer™ camera. Simply connect the video composite (rca type) cable (yellow connector) into the "video-in" on your tv/monitor...
5 note: the usb provides ample power to the camera, no separate power supply needed focusing: the focusing ring located on the camera head is a rubber knurled focusing system with 6mm lens. Simply turn the focusing ring until you have obtained a crisp clear image. Note: the lens is permanently attac...
Lighting: your vision viewer™ operates using ambient, room light. If using camera in a severely darkened room, supplement the light entering the camera by using a penlight, flashlight or small lamp near the camera, so that there is more local input light for the camera to work with. Never point your...
7 camera complies with class a and b, part 15 of the fcc rules. Use only ken-a-vision video flex parts. The power supply and charger are made exclusively for the video flex. Failure to use non-video flex parts will void your warranty. Information to the user changes or modifications not expressly ap...
5615 raytown road • kansas city, mo 64133 u.S.A. Tel.: 816-353-4787 • fax: 816-358-5072 email:info@ken-a-vision.Com • www.Ken-a-vision.Com ins-vv ken-a-vision reserves the right to make design improvements and other changes in accordance with the latest technology. There is no obligation to make cha...
