L.L.Bean MISSION ENTERTAINMENT STAND Assembly Instructions Manual - page 5
STEP 12 - a second person is helpful here.
Position right door so that predrilled hole in bottom
edge of Door (E) engages hinge pin and washers in
right front corner of floor assembly (B) installed in
STEP 7. Close both doors as fully as possible. Grasp
door handles with one hand and pivot shelf (D)
upward. Align hinge pins in top edge of door with
predrilled hole in underside of shelf (D). Drop shelf
down to trap doors. Insert two remaining 1 1/4" #8
screws through counter sunk holes in side assemblies
(A) to fix shelf in place.
DO NOT TIGHTEN SCREWS COMPLETELY.
STEP 13
Attach top assembly (F) to side assemblies (A) by
inserting 1 1/4" #8 screws through counter sunk holes
in side assemblies into pilot holes in the top assembly
supports.
STEP 14
Tighten ALL screws and tap in wood plugs with
hammer to conceal screws.