L-Shine LS-650 Instruction Manual - page 8
7
RECORD BUTTON (F)
The Record button is used to capture still photos or videos of the image being viewed, dependent on the
setting of the Photo/Video switch. The photos and/or videos are stored on a (user supplied) micro SD
card, with up to 32GB capacity. The unit has no internal memory.
•
When the unit is in Photo Mode, pressing the record button will take a single photo of the displayed image,
standard .jpg format, at a resolution of 2592x1944/1600x1200/640x480 (adjustable) pixels.
•
When the unit is in Video Mode, pressing the record button will start a new video recording. The Record icon in the
display will begin flashing, and the Video Time display will increase as the recording continues. Video is captured
in .avi format at a resolution of 1280x720/ 640x480 (adjustable) pixels per frame (VGA).
•
To stop recording in Video Mode, press the Record button again.
(The following items are located on the bottom of the unit, under the Interface Cover Flap)
PHOTO/VIDEO SWITCH (J)
The Photo/Video slide switch under the Interface cover flap determines whether still photos or videos
are captured when using Record.
•
Set the switch to the “Photo” position to select still photo recording mode when the Record button is pressed.
•
Set the switch to the “Video” position to select video recording mode when the Record button is pressed.
MICRO SD CARD SLOT (I): a micro SD card (user supplied, up to 32GB maximum) must be inserted before it is
possible to use the Record function. If a card is not inserted, the message “No Card” will be seen on the display when
the unit is turned on.
USB PORT (H): connect a USB cable (MSDC and PCCAM adjustable) between this port and a PC/Mac to download
photos/videos without removing the card. The LS-650 is USB mass storage compliant.