La Crosse 2800 Series Frequently Asked Questions Manual - page 11
La Crosse Technology Technical Support, Rev. 1.1
Page 11
Weekly rain reflects the rain that has fallen from 12AM Monday through
11:59PM Sunday of the previous week. This will always be a week behind
and update 12AM Mondays. A Monday start is common internationally.
Monthly rain reflects the previous month’s rain and will update 12AM the
first day of the month.
Total rain will remain until you manually reset this value. Total rain reflects
the rain from time of set-up until you reset the total rain.
VIEW 1-HOUR, 24-HOUR, ETC.
Press and release the ▼DOWN ARROW to select the rainfall value to display.
SET RAIN ALARMS MANUALLY ON THE DISPLAY
In the normal display mode, press and release the ALARM key until you see the
Rainfall amount in
24-hour period
alarm.
Press and hold the SET button for 2 seconds and the selected value will
flash. Press and release the ▲UP ARROW key or ▼DOWN ARROW key to set
the alarm value.
NOTE:
Hold the arrow key in to change the value faster.
Press the ALARM key to confirm the setting. The digit will stop flashing.
RESET RAIN TOTAL
In either Mode 1 or Mode 2 display, press and release the MIN/MAX button until the
display shows the total rainfall value.
To reset the rainfall reading, press the UP ARROW button. The total rainfall amount
will reset to 0, and the time updated to current time.
NOTE
:Until the first rainfall total reset is performed, the time and date of the total
rainfall are displayed as '- - -. --. ----'. After the rainfall total is reset, the rainfall
total display will indicate the date and time of the last rainfall total reset.
RAIN COUNT IS NOT ACCURATE
PLEASE CHECK THE SOFTWARE VERSION: Updates are available for download at:
http://www.lacrossetechnology.com/support/software.php.
Please read the release
notes to ensure you have the correct version for your weather station.
Check that the unit of measure (inches or mm) is correct.