La Crosse 513-1211.513-1211A Instruction Manual - page 2
Model: 513-1211/513-1211A www.lacrossetechnology.com/support Page | 2
TIME ZONES
PST
Pacific
MST
Mountain
CST
Central
EST
Eastern
GET STARTED
Step 1: Use the time zone selector (on back) to chooseyour time zone.
Step 2: Insert 3 new AA batteries (not included) into the clock. Observe the
correct polarity.
Restart: If there is no indoor temperature data after 60 seconds, remove
batteries from the clock and press a button 20 times. After 5 minutes,
return to Step 1 above.
SET TIME, DATE AND TEMPERATURE
1.
Hold the SET button to enter time set mode.
2.
Press the WAVE/+ or DST/- buttons to adjust values.
3.
Press the SET button to confirm and move to the next item.
TIME SET ORDER:
1.
12/24 hour time format
2.
Hour
3.
Minutes
4.
Year
5.
Month
6.
Date
Press the SET button to exit, or wait 20 seconds without pressing buttons to
return to the normal time display.
DAYLIGHT SAVING TIME SETTING
Hold the DST button for 3 seconds to select DST on or off.
The DST icon
DST
appears in above the seconds when DST is on.
TIME ZONE SELECTION
Slide the time zone selector bar on the back of the clock to
choose the time zone for your area.
FAHRENHEIT/CELSIUS
Hold the °C/°F buttonfor 3 seconds to select Fahrenheit or Celsius temperature
readings.
SET TIME ALARM
Press the SET button once to enter Alarm Mode. The letters AL will show in the
seconds display.
1.
Hold the SET button for 3 seconds to enter alarm time set mode.
2.
Press the WAVE/+ or DST/- buttons to adjust values.
3.
Press the SET button to confirm and move to the next item.
Alarm Time setting order: 1. Hours, 2. Minutes