La Crosse C84612 Hardware Manual - page 15
P a g e
| 15
Temperature
(In or Out)
Low
32
°F
Rainfall in 24 hours
High
1.96 in
High
104
°F
Relative Humidity
(In or Out)
Low
High
45%
70%
PRESSURE ALARMS
1. In the normal display mode, press the ALARM button once. The high-
pressure alarm display will show.
2. Press and hold the SET button for about 2 seconds. The pressure digit will
flash.
3. Press the
▲/DATE button or ▼/RAIN button to set the high-pressure alarm
value. Hold the arrow button in to change the value faster.
4. Press the ALARM button to confirm the setting. The digit will stop flashing.
5. Press the SET button to switch the alarm on or off. The
icon indicates the alarm is switched
on.
6. Press the ALARM button once. The Low Pressure alarm display will show.
7. Press and hold the SET button for about 2 seconds. The pressure digit will
flash.
8. Press the
▲/DATE button or ▼/RAIN button to set the low-pressure alarm
value. Hold the arrow button in to change the value faster.
9. Press the ALARM button to confirm the setting. The digit will stop flashing.
10. Press the SET button to switch the alarm on or off. The
icon indicates
the alarm is switched on.
11. Press the ALARM button to move to the indoor temperature alarms.
INDOOR TEMPERATURE ALARMS:
1. The high indoor temperature alarm display will show.
2. Press and hold the SET button for about 2 seconds. The
temperature digit will flash.
3. Press the
▲/DATE button or ▼/RAIN button to set the high indoor
temperature alarm value. Hold the button in to change the value
faster.
4. Press the ALARM button to confirm the setting. The digit will stop
flashing.
5. Press the SET button to switch the alarm on or off. The
icon
indicates that the alarm is switched on.
6. Press the ALARM button once. The low outdoor temperature
alarm display will show.
7. Press and hold the SET button for about 2 seconds. The
temperature digit will flash.
8. Press the
▲/DATE button or ▼/RAIN button to set the low indoor
temp alarm value. Hold the arrow button in to change the value
faster.
9. Press the ALARM button to confirm the setting.
10. Press the SET button to switch the alarm on or off. The
icon
indicates the alarm is on.
11. Press the ALARM button to move to the indoor humidity alarms.
INDOOR HUMIDITY ALARMS:
1. The high indoor humidity alarm display will show.
2. Press and hold the SET button for about 2 seconds. The humidity digit will flash.
3. Press the
▲/DATE button or ▼/RAIN button to set the high indoor
humidity alarm value.
4. Press the ALARM button to confirm the setting. The digit will stop
flashing.