La Crosse Technology 327-1414Wv2 Instructional Manual - Current Wind Speed
Outdoor HI Temp
Indoor LOW Humidity
Wind Speed High Alert Outdoor HI Humidity
Outdoor LOW Temp
Indoor HI Temp
Outdoor LOW Humidity
Indoor LOW Temp
Indoor HI Humidity
The current wind speed which represents a 30 second average of wind
speed samples taken. This should correspond to the wind graph.
Current Wind Speed
Alerts: Wind Speed | Temperature | Humidity
Setting alert value and arming individual alerts are separate functions.
Set alert value:
1. Hold the ALERTS button for 3 seconds to enter alert set mode.
2. The high wind speed alert value will blink in set mode.
3. Press the ARROW buttons to adjust the values.
4. Press the ALERTS button to confirm and move to the next alert.
The alert setting order:
• High Wind Speed (channel 1 only)
• Outdoor Humidity HI
• Outdoor Humidity LOW
• Outdoor Temperature HI
• Outdoor Temperature LOW
• Indoor Humidity HI
• Indoor Humidity LOW
• Indoor Temperature HI
• Indoor Temperature LOW
Note: When using multiple temp/humidity sensors, before setting
alerts, press the DOWN ARROW button to select channel.
327-1414Wv2
www.lacrossetechnology.com/support/
Page | 6