La Crosse Technology C83332 Instruction Manual - 12H
Model: C83332/C83349
www.lacrossetechnology.com/support
Page | 7
12-hour or 24-hour Time Format
The Time may be displayed in 12-hour or 24-hour format. Default is 12-hour time.
Note: When in 12-hour format AM or PM will show in front of the hour.
1. 12H will flash in the time display.
2. Press and release the ▼ or ▲ buttons to select 24-hour time.
3. Confirm with the TIME SET button and move to Set Time.
Set Time
To set the time manually:
1. The hour digit will flash.
2. Press and release the ▼ or ▲ buttons to select the hour.
3. Press and release the TIME SET button to set the minutes.
4. The minute’s digit will flash.
5. Press and release the ▼ or ▲ buttons to select the minutes.
6. Confirm with the TIME SET button and move to Set Calendar.
Set Calendar
The date default of the weather station is 1. 1. 2014.
To set the calendar:
1.
The year will flash.
2.
Press and release the ▼ or ▲ buttons to set the year (between
years 2000-2039).
3.
Press the TIME SET button again to confirm and to enter the month setting.
4.
The month will flash.
5.
Press and release the ▼ or ▲ buttons to set the month.
6.
Press the TIME SET button again to confirm and enter the date setting.
7.
The date will flash.
8.
Press and release the ▼ or ▲ buttons to set the date.
9.
Confirm all calendar settings with the TIME SET button to confirm and move to select
Fahrenheit/Celsius.
Note: The day of the week will set automatically once the year, month and date are set.
Fahrenheit/Celsius
1. °F will flash.
2. Press and release the ▼ or ▲ buttons to select Fahrenheit or Celsius.
3. Confirm with the TIME SET button and exit the program menu.
Temperature Alerts
The weather station offers individual, programmable high and low temperature alerts.
Hold the ALERT button for five seconds, until the weather station beeps, to select and set
temperature alert values. Each alert value will flash separately during alert set mode.
REMOTE HIGH alert will flash. Press the ▼ or ▲ buttons to set the alert value, and press the
ALERT button to confirm. Then press the ALERT button again switch to REMOTE LOW setting.