La Crosse Technology C83332 Instruction Manual - page 8
Model: C83332/C83349
www.lacrossetechnology.com/support
Page | 8
REMOTE LOW alert will flash. Press the ▼ or ▲ buttons to set the alert value, and press the
ALERT button to confirm. Then press the ALERT button again switch to INDOOR HIGH setting.
INDOOR HIGH alert will flash. Press the ▼ or ▲ buttons to set the alert value, and press the
ALERT button to confirm. Then press the ALERT button again switch to INDOOR LOW setting.
INDOOR LOW alert will flash. Press the ▼ or ▲ buttons to choose the value, and press the
ALERT button to confirm and exit.
Note: After selecting temperature alert values use the next step to turn individual alerts ON or
OFF.
Arm/Disarm Temperature Alerts
In normal time mode, press and release the ALERT button to toggle between:
o
Remote HI
o
Remote Lo
o
Indoor HI
o
Indoor LO
Press the ▲ button to arm the selected alert. The alert bell appears when each alarm is
activated.
Press the ▼ button to disarm the selected alert.
OFF will show in the Alerts area if no alert is active.
Temperature Alert Sounds
When temperature alert sounds, the corresponding alert bell will flash.
The alert beeps once every minute, until the temperature is out of alert range.
Press any button to stop alert. The alert bell will still show.
Disarm Alert: In normal mode, hold and release the ALERT button to select the alert to
disarm. With HI or LO alert selected, press the ▼ button disarm alert.
Alarm Set
Hold the ALARM button for 5 seconds to enter the alarm time set mode.
1. The alarm hour digit will flash in the time display.
2. Press and release the ▼ or ▲ buttons to select the hour.
3. Press and release the TIME SET button to set the minutes. The minute digits will flash.
4. Press and release the ▼ or ▲ buttons to select the minutes.
5. Confirm with the TIME SET button and exit.
6. The bell icon will show next to the weekday indicating the alarm is active.
7. The bell icon will flash when the alarm is sounding.
Deactivate Alarm
1. Press and release the ALARM button once to show alarm time.
2. Press and release the ALARM button to deactivate the Alarm.
3. The bell icon will disappear indicating the alarm is no longer active.
Snooze
1. When the alarm sounds, press the SNOOZE/LIGHT button to trigger snooze alarm for 10
minutes. The snooze icon Zz will flash by the weekday when the snooze feature is active.
2. To stop alarm for one day, press ALARM button, while in snooze mode. The bell icon will
remain solid.
Note: When the alarm sounds, it continues for 2 minutes and then shuts off completely.