La Crosse Technology WS-9006U Instruction Manual

Summary of WS-9006U

  • Page 1

    Ws-9006u wireless temperature station instruction manual features: four digit time display 12-hour or 24-hour selectable time indoor temperature (°f or °c) outdoor temperature (°f or °c) minimum and maximum temperature four level rf strength indicator wall hanging or free standing low battery indica...

  • Page 2

    Initial set up: important: - do not mix old and new batteries - do not mix alkaline, standard, or rechargeable batteries note: this temperature station can receive one transmitter only. First, insert fresh 2x aa, iec lr6, 1.5v alkaline batteries into the tx43u transmitter, observing the correct pola...

  • Page 3

    Set time: 12/24-hour time: hold the cf/set button until 12hr or 24hr flashes in the lower right hand corner. Press and release the mix/max/+ button to switch between 12-hour and 24-hour time. Press the cf/set button once to continue. Hour: the hour will flash. Press and release the mix/max/+ button ...

  • Page 4

    Positioning the remote temperature transmitter: wall mount using the hole on the back of the sensor. Best location is under the eave (12-18 inches) on the north side of the home. Wall mount: 1. Install a mounting screw (not included) into a wall —leaving approximately 3/16 of an inch (5mm) extended ...

  • Page 5

    Warranty information la crosse technology, ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in north america and only to the o...

  • Page 6

    Www.Lacrossetechnology.Com/9006 le manuel d'instruction complet est disponible sur: www.Lacrossetechnology.Com/9006 el manual de instrucciones completo está disponible en: www.Lacrossetechnology.Com/9006 contact support: 1-608-782-1610 product registration: www.Lacrossetechnology.Com/support/registe...