La Crosse WS-1912 Quick Setup Manual

Page of 9

Download

Print this page

Bookmark us

QUICK SET UP MANUAL - WS-1912 WEATHER CENTER

Using 915MHz wireless transmission of weather data, this unique weather station can be

powered using batteries for all your weather needs in the home or office.

Carefully open and check that the following contents are complete:

Item: Consisting

of:

Fittings:

Illustration:

Base

Station

1) Main

unit

Thermo-

Hygro

Sensor

(TX31U-IT)

1) Main

unit

2) Rain

protection

cover

1) Wall

mounting

screws

2) Plastic anchors for

screws

3) 2 x cable ties

INSTANT TRANSMISSION is the state-of-the-art

new wireless transmission technology,

exclusively designed and developed by LA

CROSSE TECHNOLOGY. INSTANT

TRANSMISSION offers you an immediate update

(every 4.5 seconds!) (every 6.25 seconds for

rain! optional) of all your outdoor data

measured from the transmitters: follow your

climatic variations in real-time!

This product offers:

Cable connection between the wind sensor and

the thermo-hygro transmitter

OPTIONAL

Wireless transmission

at 915 MHz – Self-

Emptying Rain sensor

to weather station

Wireless transmission at

915 MHz - thermo-hygro

transmitter to weather

station

Weather Center

Wind sensor

Rain sensor (sold separately)

(TX32U-IT)

Thermo-hygro

transmitter

Wind

Sensor

(TX55U-IT)

1) Main

unit

with wind

vane

2) 32ft

cable

(already

attached the

main unit)

3) Mast

holder

1) 1 x U-bolts for

mast holder

2) 2

Washers

3) 2 x Nuts

4) 2 x cable ties

SETTING UP:

1 2 3 4 5 6 7 Next › »

Summary of WS-1912

Page 1
1 quick set up manual - ws-1912 weather center using 915mhz wireless transmission of weather data, this unique weather station can be powered using batteries for all your weather needs in the home or office. Carefully open and check that the following contents are complete: item: consisting of: fitt...
Page 2
3 note: when putting the weather station into operation, it is important to have them in close proximity (e.G. On a table 5 ft from display) while completing wiring and set- up of the system. This step is important to allow testing of all components for correct function before placing and mounting t...
Page 3
5 if the signal reception is not successful on the first frequency (915mhz) for 45 seconds, the frequency is changed to 920mhz and the learning is tried another 45 seconds. If still not successful, the reception is tried for 45 seconds on 910mhz. This will also be done for re-synchronization. How to...
Page 4
7 in the event of changing batteries in any of the units, all units need to be reset by following the setting up procedures. This is because a random security code is assigned by the transmitter and rain sensor (optional) at start-up and this code must be received and stored by the weather station i...
Page 5
9 air pressure history histogram # when the signal from the transmitter/ or rain sensor (optional) is successfully received by the weather station, the icon will be switched on. (if not successful, the icon will not be shown on the lcd). User can therefore easily see whether the last reception was s...
Page 6
11 manual settings: the following manual settings can be changed once the set key is pressed and held for about 3 seconds: lcd contrast setting manual time setting 12/24 hour time display calendar setting °c/ °f temperature unit setting wind speed unit rainfall unit setting air pressure unit setting...
Page 7
13 6. Use the + or min/max key to set the date. 7. Confirm all calendar settings with the set key and enter the °c/°f temperature unit setting. °c/°f temperature unit setting the temperature display can be selected to show temperature data in °f or °c. (default °f) 1. The temperature unit is flashin...
Page 8
15 note: this calibration facility is useful for those users living at various elevations above sea level, but wanting their air pressure display to be based on sea level elevation. Weather tendency threshold value setting you may select a definite switching sensitivity value, .06, .09, or .12 inhg ...
Page 9
17 note: after mounting the units, should the weather data not be received, user may need to remove the batteries from all units and redo the set-up procedures after about 5 minutes. Rain sensor (optional) the rain sensor should be mounted horizontally about 2-3ft off from the ground (or higher) in ...