La Crosse WS-6010U Quick Setup Manual - page 7
7
2.
The hour digits will start flashing.
3.
Set the desired hours by pressing and releasing the + key followed by pressing the SET
key.
4.
Now the minute digits will start flashing.
5.
Set the desired minutes by pressing and releasing the + key. If the + key is held, the units
will increase by 5.
6. Press
the
SET key again to confirm and enter the Solar Mode setting.
SOLAR MODE
The Solar Mode is used for saving the power consumption of the rechargeable battery (Default
setting ON):
1. The
characters
“ON” or “OFF” will start flashing. By use of the + key select “ON” or
“OFF” to set the solar mode.
2.
Press and release the SET key to exit the setting mode and switch back to the normal
display mode.
If the solar mode setting is ON:
The surrounding environment brightness is checked every 5 seconds.
LCD will automatically turn OFF if the environment is too dark.
LCD will automatically turn ON if the environment is bright enough.
No information will be displayed when the LCD is OFF, but all the settings and
operations will remain, except for the temperature and humidity measurements.
If the solar mode setting is OFF:
LCD will remain ON constantly.
STOP MODE
If the Solar Station is placed in a dark environment for 72 hours continually, the clock will go to
the stop mode:
The most power saving condition.