La Gard 3710 User Operating Instructions

(P/N) 754.118 Rev B 02/12 • © copyright 2006-2012 

Kaba Mas LLC

Page 1 of 2

OPENING THE LOCK

1. Enter valid six (6) digit combination. (Factory set to 1-2-3-4-5-6)

2. The lock will confirm a valid combination entry with a double signal.

3. Within four (4) seconds, turn handle to the open position.

4. Pull door open.

• 

Invalid Combination Entry - Lock will signal three (3) times.

WRONG TRY PENALTY

•  Entry of four (4) consecutive invalid combinations starts a five (5) minute 

  delay period.

    - LED flashes red at ten (10) second intervals.

•  At the end of the delay period, two more consecutive invalid combinations will 

  restart an additional five (5) minute delay period.

NOTE: Entry will not respond to keystrokes during delay period.

CHANGING YOUR COMBINATION

ALWAYS PERFORM THIS OPERATION WITH THE DOOR OPEN

1. Enter “zero” six times.

2. Enter your existing six (6) digit combination one time.

3. Enter your NEW six (6) digit combination two times.

4. If a mistake is made wait thirty (30) seconds and repeat steps 1 - 3.

5. Test lock operation several times before closing the door.

CAUTION: When selecting a combination do not use birthday or other predictable 

data that could give correlation between the user and combination. Keep the 

combination secret.

USER OPERATING INSTRUCTIONS

3710

Electronic Entry Device

FEATURES

See Manager Instructions for additional features.

USER Combination

•  Open Lock

•  Change Combination

WRONG TRY PENALTY

•  Four (4) consecutive invalid combination initiates 

  five (5) minute delay period.

LOW BATTERY WARNING

•  Repeated LED flashing and beeping during

  opening indicates battery is low and needs

  immediate replacement.

AUDIO AND VISUAL SIGNAL

•  Double signal - two (2) LED flashes and two (2) 

  beeps - indicates entry is valid or accepted.

•  Triple signal - three (3) LED flashes and three (3) 

  beeps - indicates invalid or not accepted.