Laars MASCOT LX User Manual

Summary of MASCOT LX

  • Page 1

    User’s manual document 1286a h2364100a warning if the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other a...

  • Page 2: Section 1.

    Laars heating systems contents pgs - familiarizing yourself to the laars mascot lx .............1 1. Caring for your mascot lx ......................................2 2. Filling, shut down and restart ...............................2-3 3. The user interface and the digital display ............4-5 m ...

  • Page 3

    User’s manual - mascot lx boilers and water heaters page 1 figure 2. Location of components. Laars heating systems page 2 figure 3. Location of components 1.5 mascot lx, overview central heat in connection (return water) central heat in connection (return water) central heat out connection (supply w...

  • Page 4

    Laars heating systems page 2 1. Caring for your mascot lx your mascot lx will require very little maintenance. However, as with any fine appliance there are certain steps that should be taken to ensure continuing optimum performance. 1.1 general care keep the area around the mascot lx clean and free...

  • Page 5

    User’s manual - mascot lx boilers and water heaters page 3 warning improper adjustment may lead to poor combustion quality, increasing the amount of carbon monoxide produced. Excessive carbon monoxide levels may lead to personal injury or death. Warning do not use this boiler if any part has been un...

  • Page 6

    Laars heating systems page 4 figure 3. The user interface. 3.1 digital display the centerpiece of the user interface is the digital display. All of the needed parameters of the mascot lx can be viewed and adjusted on this digital display. All controls can be adjusted using the ‘select’ button and th...

  • Page 7

    User’s manual - mascot lx boilers and water heaters page 5 the building’s heating loop. Only after the value shifts position will the firing sequence begin. 3.4 modulation control the control uses a pid algorithm to adjust the firing rate of the boiler as the control point is approached. The goal of...

  • Page 8

    Laars heating systems h2364100a customer service and product support: 800.900.9276 • fax 800.559.1583 headquarters: 20 industrial way, rochester, nh 03867 • 603.335.6300 • fax 603.335.3355 1869 sismet road, mississauga, ontario, canada l4w 1w8 • 905.238.0100 • fax 905.366.0130 www.Laars.Com litho in...