Instruction manual ultra-low temperature freezer model : lf-300c labnics equipment please read this manual carefully before using the instrument.
Thank you for buying a labnics freezer! For your personal safety and better performance of the unit, please read this instruction manual thoroughly and save it properly for future reference. Failure to read, understand and follow the instructions given in this manual may result in damage to the unit...
Safe cue:- please read this manual carefully while using our machine for the first time. The one who operates ultra low temperature freezer should be trained and authorized. The maintenance of equipment should be made by labnics or their agent. If you have some query whose solution is not given in t...
Table of content chapter content page no. 1 schematic picture and description 1 2 pre-installation 1 3 operation direction 2 3.1 using for the first time 2 3.2 adjust the temperature 3 4 defrost, unused, maintenance 4 4.1 defrost 4 4.2 maintenance 4 5 service after sale 4 6 technical information 5 7...
Body handle door body - 1 - chapter1. Schematic picture and description:- ultra-low temperature freezer is designed to store materials under very low temperature condition for hospitals, epidemic stations, blood banks, research institutes, universities, biological pharmaceutical industries and gene ...
- 2 - 6) freezer working conditions are:- ultra low temperature freezer working rule: running intermission p3 : n and e ports can't connect safety introduction:- chapter 3. Operation direction:- 3.1 when using for the first time:- o o environment temperature: 10 c to ~ 40 c. Relative humidity: ≤ 80%...
Set - 28 - 3 - 3.2 adjust the temperature:- display temperature how to set the temperature:- the control panel can adjust manually, step as a-b : 5 seconds after turning on the power, screen will display the current temperature. Please follow the following steps to adjust the temperature:- press "se...
- 4 - chapter 4. Defrost, unused, maintenance:- 4.1 defrost:- 4.2 maintenance:- chapter 5. Service after sale:- problem possible cause if there is some frost on the surface of chamber for a long time then it will decrease the performance of freezer. So if the thickness of frost is more than 10mm the...
- 5 - below are normal operations: chapter 6. Technical specifications:- chapter 7. Circuit diagram:- power supply : all technical parameters and circuit diagram in nameplate are final ones for your units. There are some light clashes when the compressor starts up and stops. During rainy and watery ...
Customer’s address : service report contact person / designation : tel.No.: fax no.: weekly off.: dept.: date nature of problem : observation & action taken : customer’s remarks : parts replaced : parts recommended / action required : yes service engineer’s name & signature requisition number : cust...
