Labnics Equipment LF-300C Instruction Manual - page 5
Body
Handle
Door Body
- 1 -
CHAPTER1. SCHEMATIC PICTURE AND DESCRIPTION:-
Ultra-low temperature freezer is designed to store materials under very low temperature condition for hospitals,
epidemic stations, blood banks, research institutes, universities, biological pharmaceutical industries and gene
engineering, etc. The internal temperature in cabinet can be easily adjusted through the keys on control panel. All
operations are convenient and reliable.
CHAPTER 2. PRE-INSTALLATION:-
Notice: While moving the freezer, wheel should not damage the line.
Notice: Take away the packing base before running the freezer.
Notice: After connecting the power supply, do not keep the goods immediately in the freezer. Please wait for
about 12 hours
1)
How to Transport: Pick up the unit from the bottom of tank and a slant with 45° is acceptable. All
transportation should be done carefully.
2)
Remove all wrappers.
3)
Check accessories and documents according to package list.
4)
Clean the unit thoroughly before any operation.
5)
Installing Location: Do not keep the unit in direct sunlight or near heating diffusers, radiators, or other
o
sources of heat. The ambient temperature should not exceed 32 C. A minimum 20cm space on the sides,
rear and top should be provided for better air circulation and heat discharge. Avoid location where there is too
much cold, high humidity and can be easily splashed by water.