LaCie 720 User Manual - Lacie 730
LaCie 700 Series LCD Monitors
Troubleshooting
User Manual
page 31
LaCie 730
4.2.
Problem
Checklist
Solutions
The monitor will not turn
on.
Is the power cord connected
properly?
Check the power cord connection and supply.
No images appear on the
screen.
Is there a “Check Signal Ca-
ble” message on the screen?
If a “Check Signal Cable” message appears on the screen when the
monitor is connected properly, check to see if the monitor status is set to
analog. Press the ‘Information‘ button to check the input signal source.
If the power is on and the
above message does not ap-
pear…
…reboot the computer to see the initial screen login screen. If the
initial login screen appears, boot the computer in Safe Mode and then
change the frequency of the video card.
NOTe:
If the initial screen (the login screen) does not appear, contact
the Service Center or your dealer.
Is the power indicator on the
monitor blinking at 1 second
intervals?
The monitor is in PowerSaver mode. Press a key on the keyboard to
activate the monitor and restore the image on the screen. If there
is still no image, press the ‘[Xxxx]‘ button, then press any key on the
keyboard again to activate the monitor and restore the image on the
screen.
The screen shows strange
colors or just black and
white.
Are images on the screen
tinted with a color?
Check your video card connection. Make sure the video card is fully
inserted in its slot.
Have the screen colors be-
come strange after running a
program or after an applica-
tion crash?
Reboot the computer.
Has the video card been set
properly?
Refer to the documentation that came with your video card to set it
properly.
The screen suddenly has
become unbalanced.
Have you adjusted the resolu-
tion or frequency of your video
card to the monitor?
Refer to the documentation that came with your video card to adjust
its resolution and frequency.
The LED is blinking but
there are no images on
the screen.
Is the Display Timing frequency
properly adjusted?
Refer to the documentation that came with your video card to adjust
its frequency.
The screen displays im-
ages in only 16 colors.
Have the Windows display set-
tings been set properly?
Windows ME/2000/XP: Set the colors properly in Control Panel/
Display/Settings.
The screen colors have
changed after changing
the video card.
Has the video card been set
properly?
Refer to the documentation that came with your video card to set it
properly.
I cannot use the
2560x1600 resolution
with the monitor.
Does the graphics card on
your computer support the
2560x1600 resolution?
If your graphics card does not support the 2560x1600 resolution,
then you can only use the 1280x800 resolution with your monitor. To
use the 2560x1600 resolution, replace your graphics card with one
that supports that resolution.