Quick install guide box design by neil poulton.
Note: the lacie box is uniquely produced to accommodate sata 3.5” hard disk drives. No other drives save for sata 3.5” hard disk drives are compatible with the lacie box. Please note that, due to the numerous manufacturers of sata 3.5” hard disk drives, lacie cannot guarantee that every model will w...
Note: the lacie box is uniquely produced to accommodate sata 3.5” hard disk drives. No other drives save for sata 3.5” hard disk drives are compatible with the lacie box. Please note that, due to the numerous manufacturers of sata 3.5” hard disk drives, lacie cannot guarantee that every model will w...
Setup steps i) install an internal hard disk drive. 1. Make certain the power and usb 2.0 cables are disconnected from the lacie box. 2. Turn the box over so that the rubber feet are pointing up. Please note the two plastic bands for prying the bottom plate from the top shell. 3. Open the casing by ...
7. Replace the casing by aligning the rear ports with their respective slots, and then gently press down on the front until you hear an audible “click”, indicating closure. Note: lacie does not recommend removing the two bands on the face of the drive. In such an event, please take great care when s...
Copyright © 2010, lacie 714190 091125 lacie usa 22985 nw evergreen pkwy hillsboro, or 97124 sales@lacie.Com lacie france 17, rue ampère 91349 massy cedex info.Fr@lacie.Com lacie asia (hk) 25/f winsan tower 98 thomson road wanchai, hong-kong info.Asia@lacie.Com lacie asia (singapore) centennial tower...
