Lafayette ZEUS User Manual - English
2 beep (bP) function
Press FC button and press BP button, BP letter is displayed and BP becomes ON and BEEP
tone is generated in operating button.
To release it, press FC button and press BP button again and BP becomes OFF and is
released.
5 - Sw/SC (SUb wATCh/SCAN)
Sub watch (Sw) function
It is a function which enables you to receive two channels at the same time with one re-
ceiver by using main channel in operation and other designated channel as sub channel
in order to communicate with an association of like-minded persons or the third party
conveniently.
It searches receiving channels by checking two channels of main channel and sub channel
in turns.
when receiving is completed channel stops automatically. It restarts search in 7 seconds
completion of receiving.
In pressing Sw button again, Sw mode stops.
Operation method is as below.
MCH and SCH is displayed in turns.
If receiving is heard, Sw stops and receives it.
when receiving stop, Sw function restarts in 7 seconds.
In pressing PTT button during channel repeat, it moves to the last received channel
automatically and in pressing PTT button during watch, it moves to main channel.
To release it, press PTT, Sw, CH9 UP/DOwN button.
Search scan (SC) function
It’s a scan function to search which channel is transmitting.
In pressing scan button, channel moves to higher channels and start searching.
when it stops at the channel which the other party is transmitting and transmission is com-
pleted it restart search in 7 seconds.
To stop searching, press PTT, FUN, Sw, AM.FM, UP/DOwN button.
6 - AUTO SqUElCh/MEMORY 1/(ASq/M1)
Auto squelch function
It set up squelch in fixing to remove noise more than a certain level and to release incon-
venience of squelch volume usage.
Memory(M1~ M3) function
Memory method (M1 ~ M3)*
In saving memory: Select channel you want to memorize by channel switch.
Press FC button and press button of M1~M3 long you want to memorize.
It is memorized with beef sound and release FC model.
* In calling memory: Press FC button and press M1~M3 you want to call and the memory
is displayed on LCD.
7 - FREqUENCY/MEMORY 2(FRq/M2)
Frequency (FR) function
It’s a function to indicate channel as frequency.
In pressing FR button, frequency is displayed in 5 SEGMENT.
To release it, repeat the above operation.
1
a.
b.
c.
d.
e.
2
1
2
•
•