Lagoon 620 User Manual - page 53
Nota : when the connection module of the called component is red, a
failure is signalled ; you shall follow the instructions shown on the
screen.
IN CASE THE TOUCH-SENSITIVE SCREEN SHOULD NOT WORK PROPERLY:
In case the multifunction touch-sensitive screen should not work
properly, it is possible to control the functions using the multiplexing
system monitor screen (CPU monitor screen) located under the chart
table, or if all else fails, straight pressing the Eplex Modules.
1° Action using the CPU monitor screen:
(refer to the illustrations on the opposite page)
1 - Access to the 'Controls' and 'Monitoring' functions.
2 - Back to the welcome screen.
3 - Voltage of the service batteries.
4 - 'Controls' menu: access to lightings and electronics.
5 - 'Monitoring' menu: access to information about Tanks
and Batteries.
6 - Selection of the functions available in the 'Controls' menu.
7 - Information monitor screen.
8 - Access to the selected function (ON / OFF).
9 - Selection of the functions available in the 'Monitoring' menu.
10 - Information monitor screen.
11 - Inactive.
ELECTRICITY
ELECTRICITY
4
LAGOON 62O
51