Laird MTTC-1410 User Manual
Innovative
Technology
for a
Connected
World
MTTC-1410
User Manual
General DesCripTion
The MTTC-1410 Thermoelectric Temperature Controller is a precision instrument that utilizes Pulse Width
Modulation (PWM) control technology to provide accurate temperature control of thermoelectric devices.
The MTTC-1410 is a bi directional controller with selectable voltage output and a full “H” bridge capable
of load currents of up to ten amperes. The unit’s LED front control panel can be used to adjust the setpoint
temperature, to view the current temperature, or to fine-tune the control parameters for higher accuracy or
faster response.
speCifiCaTions anD feaTures
• Input Power: 110(1.5A)/220VAC(0.8A), 50~60Hz
• Range of selectable DC output voltages: 3, 7, 12, and 14 VDC (PWM)
• Maximum Output Current: 10A
• Control temperature range: -100°C to 200°C
• Control stability: 0.1°C/24h
• Temperature sensor: 2 wire Pt1000 RTD (included)
• Control output: Proportional control with automatic reset and rate (PID),
500 Hz Pulse Width Modulation (PWM)
• Dimensions: 15cm (5.9”) x 12.5cm (4.9”) x 26cm (10.2”)
• 3.5 digit LED display, 4 button user interface
• Extra terminals for constant 12VDC fan operation (up to 1 Ampere)
Available ranges for settings
Item
Display
Range
Units
Setpoint
88.8
1
-100.0
2
– 199.9
°C
Proportional band
P000
1
0 – 20
%
Integral (reset time)
A000
1
0 – 250
Seconds
Derivative (rate time)
D000
1
0 – 100
Seconds
Calibration offset
C00.0
1
-5.0 – 5.0
°C
1
Number shown only as an example of the display.
2
–100.0°C will show as “-00.0” in the display.
global
solutions:
local
support
TM
Americas: +1.888.246.9050
Europe: +46.31.704.67.57
Asia: +86.755.2714.1166
CLV-customerservice@lairdtech.com
www.lairdtech.com/thermal