1. DL manuals
  2. Lamber
  3. Water Filtration Systems
  4. RO400C
  5. Technical Manual

Lamber RO400C Technical Manual

Summary of RO400C

  • Page 1

    Technical manual water purifier ro400c ro400c : ro400ci020 : - with 20l storage tank ro400cc060 : - with 60l storage tank ro400cc075 : - with 75l storage tank ro400cc120 : - with 120l storage tank ro400cc150 : - with 150l storage tank.

  • Page 2

    Manuel technique osmsoeurro400c version 3 page 2 / 26 contents general view of the appliance................. Errore. Il segnalibro non È definito. Technical data..................................................... Errore. Il segnalibro non È definito. Thanks...........................................

  • Page 3

    Manuel technique osmsoeurro400c version 3 page 3 / 26 arrivée eau froide = cold water inlet vidange = drain eau traitée = purified water 1. Water purifier ro400c 2. Power cord 230v - 50 hz 3. Flexible hose for feed water 4. Bracket for drain hose 5. Drain hose 6. 1/4 turn valve 7. Purified water hos...

  • Page 4

    Manuel technique osmsoeurro400c version 3 page 4 / 26 technical data size height 466 mm depht 460 mm width 225 mm weight 29 kg when supplied 33kg when filled with water capacity (water temp. 15°c) 3,1 (+0,4) litres/minute total water consumption the double of produced water electrical supply 230v, 5...

  • Page 5

    Manuel technique osmsoeurro400c version 3 page 5 / 26 thanks lamber thanks you for the confidence you have shown by buying one of its products. Your water purifier is conceived to have a long life. You will find into this manual all necessary information concerning installation, start, functioning, ...

  • Page 6

    Manuel technique osmsoeurro400c version 3 page 6 / 26 unpacking 1. Unpack the water purifier - open the box - recover the accessories box - lift out the ro400c by taking it hold from the hand-grip. 2. Open the accessories box and check the equipment - the technical manual you are reading - 1 drain h...

  • Page 7

    Manuel technique osmsoeurro400c version 3 page 7 / 26 connection 1. Remove the 3 red plugs attention : for the purified water outlet, keep the grey ring pressed while you remove the red plug. 2. Screw and tighten by hand the cold water inlet flexible hose 3. Place the drain hose by using the clamp 4...

  • Page 8

    Manuel technique osmsoeurro400c version 3 page 8 / 26 storage tank connection the explanation is here provided with a 20l stainless steel storage tank. The assembly is the same for all models. 1. Screw the t with teflon on the outlet hose 2. Connect the flexible machine feed hose on the t. Ø pressur...

  • Page 9

    Manuel technique osmsoeurro400c version 3 page 9 / 26 installation attention : - do not connect to electrical supply, - make sure the ¼ turn valve is closed, - do not carry out any connection on the appliance’s inlet or on the storage tank. 1. Open the feed water supply, the water purifier is under ...

  • Page 10

    Manuel technique osmsoeurro400c version 3 page 10 / 26 installation (continuation) test 9. Open the ¼ turn valve of the purified water hose. 10. Check the following lighting up of the lights i, ii and iii. Phase ii is very short. 11. Close the purified water valve. 12. Check the flushing that should...

  • Page 11

    Manuel technique osmsoeurro400c version 3 page 11 / 26 maintenance even if everything has been conceived so that to be forgotten, your water purifier requires a minimal care. Here is the regular maintenance that ro400c requires so to produce a high quality water: information below concern a water pu...

  • Page 12

    Manuel technique osmsoeurro400c version 3 page 12 / 26 replacing the filters replace the filters when the water purifier requires it (see diagnostic section) and at least once every 6 months. 1. Disconnect the electrical plug. 2. Pull the filters containers support outwards as far as they will come....

  • Page 13

    Manuel technique osmsoeurro400c version 3 page 13 / 26 frequency of descaling hardness frequency every 6 months every 3 months every month descaling in time, the substances which ro400c removes from the water tend to clog the membrane and so to reduce the flow of pure water. To prolong the life of t...

  • Page 14

    Manuel technique osmsoeurro400c version 3 page 14 / 26 curative descaling (about 10 hours) if a preventive descaling is not enough to restore the original flow of purified water, it’s necessary to do a curative descaling. This operation is the last way you have before having to replace the membrane....

  • Page 15

    Manuel technique osmsoeurro400c version 3 page 15 / 26 preparing the water purifier for storage and protecting it against freezing if you should not use the water purifier for a period longer than 4 months or if it has to be disconnected from water and electrical supplies for many days, it should be...

  • Page 16

    Manuel technique osmsoeurro400c version 3 page 16 / 26 trouble shooting table light off light on light flashing symptoms possible cause action to take automatic restart after 3 attempts of automatic restart (3 min., 20 min., 4 hours), if the pressure is always too low, the alert mode will take place...

  • Page 17

    Manuel technique osmsoeurro400c version 3 page 17 / 26 trouble shooting table (continuation) symptoms possible cause action to take low water flow clogged membrane • descale the membrane. See « descaling ». The water purifier starts working on its own (briefly, with closed tap) leakage (even very li...

  • Page 18

    Manuel technique osmsoeurro400c version 3 page 18 / 26 control functions the water purifier is equipped with some control functions to facilitate the diagnostic in case of trouble. Displaying of the functioning times close the tap for purified water – press for 3 sec. “calibration” – release for 1 s...

  • Page 19

    Manuel technique osmsoeurro400c version 3 page 19 / 26 situation of the main parts see the exploded view for more details 1. Membrane 2. High pressure pump 3. Pressure regulator 4. Inlet solenoid valve 5. Drain solenoid valve (flush) 6. Purified water outlet 7. Outlet pressure switch 8. Pressure swi...

  • Page 20

    Manuel technique osmsoeurro400c version 3 page 20 / 26 technical information (continuation) top and cover disassembling: 1. Unscrew the 2 screws in the upper and back side of ro400c 2. Lift and pull the top. 3. Unscrew the 2 screws in the upper part of the filter compartment 4. Unscrew the 2 screws ...

  • Page 21

    Manuel technique osmsoeurro400c version 3 page 21 / 26 pressure switches re-initialisation after a pcb board replacing or after a configuration loss or also after a membrane replacing, it could be necessary to recalibrate the pressure switches’ parameters. Symptoms : - the water purifier flushes nor...

  • Page 22

    Manuel technique osmsoeurro400c version 3 page 22 / 26 wiring diagram.

  • Page 23

    Manuel technique osmsoeurro400c version 3 page 23 / 26 exploded view – spare parts.

  • Page 24

    Manuel technique osmsoeurro400c version 3 page 24 / 26 exploded view – spare parts (continuation) position description article n° 1 support 2 cushion 3 driving belt cpro400c 3b dust protection 4 driving pulley for motor 5 support for motor 6 driving pulley for pump 6a insulation ring 6b protection f...

  • Page 25

    Manuel technique osmsoeurro400c version 3 page 25 / 26 exploded view – spare parts (continuation) position description article n° 1 body 2 handle 3 cable clamp (stuffing box) 3b protection for power cord 4 power cord 5 top csro400c 5a sealing ring for top jcsro400c 6 lead-through 8 control panel fpr...

  • Page 26

    Manuel technique osmsoeurro400c version 3 page 26 / 26 declaration de conformite declaration of conformity nous déclarons sous notre seule responsabilité que les produits suivants : we declare, under own responsibility that the followings products : osmoseur serie ro400c water purifier reverse osmos...