Lamona LAM1763 User's Installation Manual - page 9
_ 09
User manual LAM1763
Touch Controls
The touch controls for your induction hob have been
designedtoprovideyouwithfingertipcontrolof
your hob, providing accurate and repeatable power
settings for cooking and an easy clean surface
that can be easily wiped over. When a cook zone
is activated the power setting is displayed for each
zone individually,
Using the Touch Controls
Usetheflatofyourfinger,notthetip,thecontrols
respond to touch, so you don’t need to apply any
pressure.
Always ensure the control area is clean, dry and free
from of any objects (e.g. utensils, tea towels and
cloths), spillages and water may make the controls
difficulttooperate.Awarningwillbeactivatedand
will beep to attract your attention. ER03 will be
displayed and the control will switch off after 10
seconds. Please remove any objects and clean the
control area as appropriate.
Controls layout
1
2
3
4
5
Note;
Generic illustration shown above your
appliance may visually differ.
COOK ZONE KEYS
INDIVIDUAL COOK ZONE DISPLAYS
POWER DOWN KEY (-)
POWER UP KEY (+)
ON/OFF KEY
6
TIMER DISPLAYS
1
1
2
6
2
2
33
4
5
Central On/Off switch.
a
e
b
f
c
g
d
h
+
=
=
The central on/off switch enables all of the cooking
zones to be switched off simultaneously at a touch
of a key.
To switch on the hob
The hob is switched On by touching the
“ON/OFF”keyfor1sec.Abeepsoundsandallthe
zone displays show a full stop in the cook zone
display. If the selection of a zone is not done in 10
seconds, the hob will turn off automatically.
ThehobisswitchedOffbytouchingthe“ON/OFF”
key for 1 seconds. A beep sounds and all the zones
are switched Off.
Switching on an individual hob cook zone
a
e
b
f
c
g
d
h
+
=
=
To switch on a cook zone it is necessary to actuate
every cooking zone by means of two operations:
1. Touch the required cook zone key for approx 1
second a beep sounds and the heater display
shows the power level with normal brightness.
The zones that are not selected are dimmed.
Whenthecookzoneselectionisfinishedafter
10 seconds, a beep sounds and all the zone
displays that were dimmed show the power
levels with normal brightness.
2. Select the required power setting using the up
+/down – keys.
Switching off an individual Hob Cook zone
Once the cook zone is selected, it can be
switched off by touching the down [-] key until the
corresponding display shows “0”.
a
e
b
f
c
g
d
h
+
=
=
03 - Using the hob
Using the hob