Lamperd MSS100 User Manual - page 7
7
1. The top left corner is the remaining recording time of the SD card;
2. The top right corner is the SD card and battery power;
3. The second line is the system date and time;
4. Last second line is the ID number of the policeman;
5. Button right corner is the spare capability of the SD card.
4.2. Standby
If there is no operation for 3 minutes, it enters the standby state and the LED light off,
the indicator light 2 blue flashes in this state, you can press any button to active it.
4.3. System Setting
To enter the system setting you must connect the device to a computer that has the driver
and software management installed accordingly.
Date/ Time/ Password/ ID number can be set on the device via connecting the computer
and set them using the background management software.
This can see at the “back-stage management software “user’s manual part.
System settings
Video size
1920X1080
Date
2013.11.18
Time
16:31
Password
* * * * * *
ID number
0123456789ABC
Photo size
16M
System setting display
Notice:
1. In this page, you can set the resolution and the photo size.
2. Date/ Time/ Password/ ID number cannot set on the machine, it needs to connect
the computer and set them using the background management software. This can
see at the “back-stage management software” user’s manual part.