Lampociclo E bike User Manual - page 7
User guide rev 7 .doc - Page 7
LAMPOCICLO USER GUIDE
www.lampociclo.com info@lampociclo.com
3.2.
Loosen the hub bolts, brake retainer and brake cable (Q)
3.3.
If necessary remove the motor carter by loosening screws (R) to remove chain.
3.4.
Remove the wheel.
Troubleshooting
1.
Motor does not start when pedaling
a.
check the key position
b.
connect the charger and be sure the light turns green after a few minutes
c.
recharge the battery
d.
check the battery plug inside the battery compartment
e.
check the bike fuse
f.
check for dirt over sensor magnets behind chainring
2.
Motor stopped during ride and unable to restart
a.
Battery is empty, recharge.
b.
check the battery plug inside the battery compartment
c.
check the bike fuse
d.
check for dirt over sensor magnets behind chainring
3.
Gear seems to get out position during ride