LAN Power Systems LP2521 Installation And User Manual - Introduction
Introduction
1
Functions and Features
The LPS Model LP2521 Single Port Power over Ethernet (PoE)
Injector supports powering applications in which AC Power is
difficult or costly to access, such as VoIP Phones, Wireless LAN
Access Points, Internet Security Cameras, or other Network
devices.
The Single Port PoE Injector acts as a “patch panel” and adds
~48 VDC to unused (non-data) wires in a standard Category 5,
5e, or 6 Ethernet cable. The LP2521 delivers both data and
power over a single standard Ethernet cable to an End device
designed to receive both Data and Power through its RJ45
connector.
Key features of the Single Port PoE Injector include:
Exceeds IEEE 802.3af Power over Ethernet Standards
Supports Data links at 10Mbs, 100Mbs or 1000Mbs
Output Wattage is up to 28W continuously
Non-Conducting plastic case
Over voltage current and Short circuit protected
1-1