LAN Professional Wireless 11g ADSL Router User manual - Specification
Specification
Product:
Wireless 11g ADSL Router
Chipset
Texas Instruments
ADSL Router Chip
Line Connection
RJ-11 (2 wires) RJ-45 (4 port) Connection
ADSL Standards
DMT modulation and demodulation
Tone detection for low power mode
ITU 992.1 (G.dmt) Annex A, B, C
I T U 9 9 2 . 2 ( G . l i t e )
ITU 992.3 ADSL2 (G.dmt.bis)
ITU 992.4 ADSL2 (G.lite.bis)
ITU 992.5 ADSL2+
ANSI T1.413 Issue 2
Dying Gasp
Full-rate adaptive modem
Maximum downstream rate of 24 Mbps (ADSL2+)
Maximum upstream rate of 1 Mbps
G.lite adaptive modem
Maximum downstream rate of 1.5 Mbps
Maximum upstream rate of 512 Kbps
WAN Mode Support
PPP over ATM (RFC 2364)
PPP over Ethernet (RFC 2516)
LAN Mode Support
Bridged/routed Ethernet over ATM (RFC 2684/1483)
Classical IP over ATM (RFC 1577) and PPP over Ethernet (RFC 2516)
Bridge Mode Support
Ethernet to ADSL self-learning Transparent Bridging (IEEE 802.1D)
Supports up to 128 MAC learning addresses
Router Mode Support
IP routing-RIPv2 (backward compatible with RIPv1)
Static routing
DHCP (Dynamic Host Configuration Protocol) Server and Client
NAPT (Network Address and Port Translation)
NAT (Network Address Translation)
ICMP (Internet Control Message Protocol)
Simultaneous USB and Ethernet operation
IGMP (Internet Group Management Protocol)
802.11g Wireless Access Point
54Mbps Access Point for wireless connectivity
Interoperable with IEEE 802.11g (PBCC & OFDM Modulation
Technology supports) 2.4GHz compliant equipment
Supports full mobility and seamless roaming from cell to cell
Support Ad hoc and Infrastructure mode
Support AP client architecture
Support WEP (64/128 bit)
Provides up to 30 users wireless connection
Work range: per node indoors approximately 30m~100m,
Outdoor (line of sight) 200m~300m depending on data rates
External antenna: one 2dbi detachable antennas with diversity support (Reverse
SMA connector)
RF Specification
Frequency band 2400-24835 MHZ (ISM), DSSS spreading, CCK, OFDM modulation
Transmission power max. 100mW
1 internal antenna, 1 external slewable antenna
Ethernet Features
Four RJ-45 connectors for 10/100 Mbps Ethernet LAN connection,
DMZ function can be set up between them
Complies with IEEE 802.3u specification
Supports Auto-Negotiation
Supports Auto-MDIX, Auto-MDI
Supports IEEE 802.3x Flow control in Full Duplex mode
Security & Firewall Functions
WEP/Firewall + MAC filter
PTT and Safety
FCC Part 15, CE,
OS
WIN 98SE ; WIN 2000
;
WIN ME
;
WIN XP
System Requirement
PII-266 + 32M RAM
Power
External DC Power
Input: 90~120V or 200~240V, 50/60Hz
Output: 7.5VDC/1A
LED Indication
PWR, ADSL LINK, WLAN, LAN 1~4
Software Upgrade
Upgrade by Ethernet Port
3