Lancia Delta Owner's Handbook Manual - page 198
IN AN EMERGENCY
197
4
With gas discharge bulbs (Xenon)
(for versions/markets, where provided)
MAIN BEAM HEADLIGHTS
With incandescent bulbs
To change the bulb, proceed as follows:
❍ remove the protective cover A-fig. 15;
❍ release the bulb holder clip A-fig. 17;
❍ disconnect the electrical connector B;
❍ remove the bulb C and replace it;
❍ fit the new bulb, ensuring that the outline of the met-
al part coincides with the grooves on the curve of the
headlight. Then reconnect the electrical connector B
and reattach the bulb holding clip A;
❍ refit the protective cover B-fig. 15.
fig. 17
L0E0156m
Due to the high power supply voltage, gas
discharge bulbs (Xenon) should only be re-
placed by specialised personnel: risk of death!
Contact a Lancia Dealership.
With gas discharge bulbs (Xenon)
(for versions/markets, where provided)
Due to the high power supply voltage, gas
discharge bulbs (Xenon) should only be re-
placed by specialised personnel: risk of death!
Contact a Lancia Dealership.
175-214 Delta 4ed gb 13-05-2009 16:11 Pagina 197