Lancia Delta Owner's Handbook Manual - page 253
252
TECHNICAL DATA
WHEELS
RIMS AND TYRES
Pressed steel or alloy rims. Tubeless radial carcass tyres.
All approved tyres are listed in the Log Book.
IMPORTANT In the event of discrepancies between the
information provided on this “Owner’s handbook” and
the “Log book”, consider the specifications shown in the
log book only.
Respect the prescribed size to ensure safety of the car in
movement. Fit tyres of the same make and type on all
wheels.
IMPORTANT Do not use inner tubes with Tubeless tyres.
SMALL SPARE WHEEL
Pressed steel rim Tubeless tyre.
WHEEL GEOMETRY
Front wheel toe-in: –1
±1 mm
Rear wheel toe-in: 2
± 2 mm
The values refer to the car in running order.
READING TYRE MARKINGS fig. 5
Example: 195/55 R 16 91 V
195 =Nominal width (S, distance in mm between
sidewalls).
55 =Height/width ratio (H/S) in percentage.
R
=Radial tyre.
16 =Rim diameter in inches (Ø
).
91 =Load rating (capacity).
V =Maximum speed rating.
fig. 5
L0E0120m
243-266 Delta 4ed gb 13-05-2009 16:15 Pagina 252