LandAirSea 3100 User Manual - page 13

7

Chapter 4:

Running Software for the First Time

IMPORTANT NOTE: After the installation, you will see two (2) icons on your desktop.

One icon is labeled Past Track and the other is labeled Smart Track.  The Smart Track

program is not used with the LandAirSea 3100 product.   Drag that icon to your recycle

bin.

Setting Up The Time Zone and Display Unit.  Under Setup select Set Time Zone.  Select

“Set Time Zone with GMT offset”.  Double check with Table 4.1 to make sure you have

the correct offset.

You can also change the time display format from this dialog box.  The default setting is to

use a 12 hour format.

Figure 4.1 - Setting the time zone and display format.

Setting up the Display Units.   Under Setup, select “Setup Display Unit”   Select either

Kilometers, Miles, or knots and click Ok.