LandAirSea 3100 User Manual - Other Software Functions

12

Chapter 7:

Other Software Functions

File Open:

You can open previously loaded data by clicking on the File Open button.  Select the

file that you wish to open and click on the open button.

Open Map:

This function allows you to open a blank map even if you do not have any data to review.

Save Data File As:

This function will allow you to save a copy of the data you currently have loaded.  This

function is usually used if you want to save an additional copy of the data to a floppy

disk for backup or moving it to another computer.

Print:

You can print the map and data track by clicking on the print button.  Make sure you zoom

in or zoom out to the portion of the data track that you wish to print. After clicking print,

you will see a dialog box similar to the one shown in Figure 7.2.

Laptop or Portable PC Navigation:

If you have a laptop or portable PC you can utilize the maps in the Past Track program to

navigate while you are driving.  Simply connect the LandAirSea 3100 to your laptop, make

sure the correct port is assign and then click this button.  You will see a message about

acquiring satellites.  As soon as 3 satellites are acquired, you will see the icon of the car

on the map exactly where you are on the map.  You can now navigate using the GPS

output of the LandAirSea 3100.