Landmark 365 User Manual - page 21
Heartland Owners Forum
http://manuals.heartlandowners.org
Landmark 365 User Guide V1.1.pdf
P a g e
| 21
Version 1.1, March 10, 2016
City
When connected to a campground water faucet, the selector should be on City. This allows the
campground water to flow directly to your water faucets, shower, and toilet. On the City setting, a
channel is also open to allow water to be pumped from the fresh tank when the pump is turned on. This
allows you to use the pump at rest stops without having to change the setting of the 4-way valve.
Normal
Anderson uses the term “Normal” to describe using the water in the fresh water holding tank in
conjunction with the water pump to deliver water to your faucets. Setting the selector to Normal
connects the fresh tank feed line to the water pump input. The pump must also be turned ON.
Sanitize/Winterize
When set to Sanitize/Winterize, the hose connected to the Anderson Valve water inlet will feed
incoming fluids to the input (suction) side of the water pump. If the water pump is turned on, it will
suck fluid from the hose, through the pump, and out to the faucets, shower, toilet, washing machine,
outside shower.
To sanitize, you can disconnect your city water hose and fill it with a bleach solution as directed in your
Heartland Trailer Manual (1/4 cup of bleach to 1 gallon of water). Then connect it to the water inlet and
use the pump to suck the mixture through the water lines to the faucets, etc.
To sanitize the fresh water tank, you’ll need to use the same technique with the selector set to Tank.
Use city water to push the bleach solution into the fresh tank.
When sanitizing, refer to your Heartland Trailer Manual for additional steps.