Laney LA30C User Manual - page 6
Laney
ACOUSTIC
21
21
22
22 23
23
LA65C rear panel
24
24
25
25
26
26 27
27
5
21. Fuse Holder: This fuse protects the AC power of the overall amplifier. Use only the correct size and rating.
Balanced Direct Inject output for connecting to external mixing desk or power amplifier.
Jack provided for use with external processing devices such as delays etc. Can also be used
as a line out providing a line level signal. This socket should be connected to the input of the
effects device. The output of the effects device should be connected to the FX return - 25.
Removes the effects loop from the signal path.
Jack provided for use with external processing devices such as delays etc. This socket should
be connected to the output of the effects device connected to 23.
Speaker connection for connecting an external speaker cabinet - total minimum impedance of
no less than 8 ohms.
Jack socket for connecting headphones.
22. D.I. Out:
23. Send:
24. Disable:
25. Return:
26. External
Speaker:
27. Headphone
Socket:
FX Loop:
This product conforms to the requirements of the following European Regulations, Directives & Rules:-
CE Mark (93/68/EEC), Low Voltage (72/23/EEC), EMC (93/68/EEC), RoHS (EU2002/95/EC),
WEEE (EU2002/96/EC)
In order to reduce environmental damage, at the end of its useful life, this product must not be
disposed of along with normal household waste to landfill sites. It must be taken to an approved
recycling centre according to the recommendations of the WEEE (Waste Electrical and
Electronic Equipment) directive applicable in your country.