Laney LC30-112 Operating Instructions Manual - page 7
SPECIFICATIONS
In order to reduce environmental damage, at the end of its useful life, this product must not be disposed of along with normal
household waste to landfill sites. It must be taken to an approved recycling centre according to the recommendations of the
WEEE (Waste Electrical and Electronic Equipment) directive applicable in your country.
Supply Voltage
~100V, ~120V, ~230V, ~240V 50/60Hz Factory Option
Mains Fuse
(~220V>240V = T630mA L 250V) (~100>120V = T1.6A L 250V)
HT Fuse
T315mA L
Power Consumption
100W
Output Power Rating
30W
Loudspeaker
12” Celestion 8 Ohms
Loudspeaker outputs
Extension speaker socket
(Minimum 8 Ohm Impedance)
Features
Pure Class A Valve tone
4xEL84 Power Tubes
(Matched Quad Set)
4x12AX7/ECC83 Preamp tubes
Hi & Lo Gain Inputs
FX Loop with Switchable Level & By-pass
Footswitchable
Channel and Reverb
(FS2 Optional)
Reverb
Digital Reverb
EQ
Passive Bass, Middle and Treble
(Separate EQ for Clean and Drive)
Bright Switch
Modern Switch
Input Impedance
1MOhm/47pF
Size (H*W*D)
451*558*278 (Base)
Unit Weight
20Kg
LC30-112
This product conforms to the requirements of the following European Regulations, Directives & Rules:-
CE Mark (93/68/EEC), Low Voltage (72/23/EEC), EMC (2004/108/EEC),
RoHS (EU2002/95/EC), WEEE (EU2002/96/EC)