Lanier 5415 Operator's Manual - Making A Copy

Making a Copy

Making Copies

1 - 3

Making a Copy

1

Select the copy options from the Copy Options table below.

Note:  If you only want one copy with no options, proceed to Step 2.

2

Place the original document on the Exposure Glass or in the optional Automatic Document 

Feeder.

3

Press the Start key to begin copying.

Copy Options 

You Can Select

Methods to Use for the Copy Options

Copy Quantity

Press the (1) key to enter quantities up to 9. 

Press the (10) key to enter copies in increments of 10

Press the (10) key in combination with the (1) key to enter 

other values.

See “Selecting Copy Quantity” on page 3-6.

Copy Darkness/

Lightness

Automatic: Press the Auto Exposure key.

Manual: Press the increase or decrease density keys.

Photo: Press Auto Exposure key to select Photo mode.

See “Selecting Copy Darkness” on page 3-7.

Copy Reduction or 

Enlargement

There are two modes for copy reduction or enlargement to 

choose from.

Preset Ratios: Pre the Zoom key to select preset ratio.

Manual Zoom keys: Press and hold the 10 Key and/or 1 Key.

See “Enlargement and Reduction Ratios” on page 3-9.

Copying Methods

Refer to the Table of Contents or Chapter 4 - Copying 

Methods for detailed information on copying methods 

available.