Lanier 5415 Operator's Manual - Toner Empty Indicator

Toner Empty Indicator

6 - 6

Service and Supplies

Toner Empty Indicator

The error indicator displayed here will appear when the toner 

supply inside of the imaging cartridge has been depleted. 

The machine will not be operable under these circumstances.

Follow the procedure provided below to replace the imaging 

cartridge when this indicator is displayed.

Replacing the Imaging Cartridge

Note:  Be careful not to touch the areas marked CAUTION: HOT, with bare 

hands.

1

Pull the Lock Release Lever and fold 

open the Upper Half of Machine.

2

Remove the imaging cartridge.

Note:  The metal parts within the 

machine are hot. Avoid placing your 

hands in direct contact with the metal 

fittings within the machine to avoid 

injury.

Note:  Be sure to properly dispose of 

the Imaging Cartridge.

3

Remove the new imaging cartridge from 

its protective packaging.