Lanier 5455 Operator's Manual - Making Copies
Making Copies
Making Copies
1 - 1
Making Copies
Main Power Switch
The Main Power switch supplies power to the copier. To
supply power to the copier, press the Main Power
Switch to ON.
•
The Message Display shows, “Now
loading....” After about five and one-half
minutes your copier comes to its Ready
condition and three beeps sound (if beep is
turned ON.) This indicates the copier is ready
for you to begin copying.
•
If the User Code feature is activated, the message "Input user code, then press #"
is displayed. Enter your User Code. See “Entering User Codes” on page 3-1.
Operation Key
The Operation key is on the far right side of the Control
Panel. It turns the copier operation on and off while
maintaining power to the copier.
If the On indicator light is OFF and the Main Power
indicator light is ON, press the Operation key.
•
The On indicator light turns ON and the
Message Display lights up.
•
To turn the copier OFF, press the Operation key again. The On indicator light turns OFF.
Place your original(s) on the copier in one of the following ways:
•
Face-up in the Document Feeder
•
Face-down, directly on the Exposure Glass