Lanner LEC-6040 User manual - page 21
Manual is about: Box PC, Hardware Platforms for Industrial Computing, Industrial
Communications
of
27
Installing a Disk Drive (HDD/SSD)
Locate the disk drive bay attached on the internal
1.
side of the top cover.
2. Place the disk drive into the bay and align the screw-
holes. Then, secure the disk drive with screws.
3. Connect a SATA cable to the disk drive
4. Connect the SATA cable to the SATA signal and power
connectors on the board. Remember that the board sup-
ports 4-pin SATA power connector. Please use a matching
connector.