Lanner LVC-2001 User Manual - Appendix B:

 Appendix B:  

Digital Input/Output  

The Digitanl I/O on the rear panel is designed to provide 

the input and output operations for the system.  For 

sample DIO code, see SuperIO folder under LVC-2001 

Utility on the Driver and  Manual CD. Make sure that 

you have installed the  Lanner GPIO driver as instructed 

below.

Driver Installation

Before you could access  or control the operation of 

the G-sensor, GPS and Digital I/O functions, install the 

the L_IO driver which is the library and driver needed 

for Lanner General Purpose Input/Output interface or 

functions.

To install the L_IO driver:

Restart the computer, and then log on with 

1. 

Administrator privileges.

Insert the Drivers and User’s Manual CD to the USB-

2. 

optical drive. 

Browse the contents of the support CD to locate the 

3. 

file in the  LIO folder.

From the control panel, click the ADD Hardware 

4. 

program

5. Select Next to proceed

6. Answer “Yes” to the question and select Next to 

proceed.

7. Select Add a new hardware device.