www.lanpro.com
Wireless - Equipment - 123 Manual - LP-C290N
300 Mbps Wi-Fi Access Point (AP) - Configuration as a Universal Repeater
4
12
13
Figure 9
Figure 10
10
11
Figure 8
Figure 7
Now go to your Network Card properties, as
shown in figure 7.
Select the TCP/IP protocol
and properties again as
shown in figure 8.
Assign an IP address inside the LP-C290N segment to your
Network Card. The LP-C290N has a default IP address
of 192.168.1.1, hence, we will use a different one in our
network card like: 192.168.1.3; please see Figure 2 in the
Blue frame, and remember that IP addresses cannot be
repeated in your network. Proceed to select OK twice as
shown in figure 9.
Proceed to open your preferred browser and with the LP-C290N IP address. In this case, use the default address 192.168.1.1,
as shown in Figure 10.