www.lanpro.com
5
Wireless - Equipment - 123 Manual - LP-C290N
300 Mbps Wi-Fi Access Point (AP) - Configuration as a Universal Repeater
14
15
16
Proceed to validate the administration IP of your LP-C290N in your diagram, remember that in this case the LP-C290N is a
client of a network, and a router or ADSL modem should be there, responsible for delivering IP addresses to the connecting
Clients. In this example, the Client will has the following address: 192.168.1.3 as shown in figure 11 , remember that your
network card has the following address 192.168.1.3 , please see the blue frame in Figure 2.
The LP-C290N, will prompt for your credentials for accessing your
configuration, in this case use the default ones: User name: admin
y Password: admin, as shown in figure 11
Figure 11
Figure 12
Select the Network / IP Address(UPNP)
option; once the IP has been changed, select
Apply, your equipment will reset and must be
accessed from now on with the new address. In
this case 192.168.1.2 , because it is the second
equipment. Please see Figure 12