Lansinoh Signature Pro Instructions For Use Manual - page 5
8
9
Lansinoh
®
Signature Pro
™
Breast Pump Parts
b6
b5
b2
b1
b
c
e
d
a
b3
b4
Item
Item Number
a Signature Pro
™
Tubing
#53403
a1 Silicone Tubes 300 mm (2)
a2 Silicone Tube 600 mm
a3 Signature Pro
™
Tubing Y Connector
#53405
a4 Signature Pro
™
Tubing Strap
#50417
a5 Signature Pro
™
White Pump Connector
#53453
b Breastmilk Expression Set Includes:
b1 ComfortFit
™
Breast Flange (2)
#50408
b2 Signature Pro
™
Breast Flange Body (2)
#53454
b3 Signature Pro
™
Diaphragm (2)
#53402
b4 Signature Pro
™
Diaphragm Cap (2)
#53410
b5 White Valve (2 + 2 extra)
#53401
b6 5 oz (150 ml) Bottle (2)
#53451
c Collar (2) and Sealing Disk (2)
#53450
d Signature Pro
™
AC Adapter/power cord
#50409
e Bottle Holder (2)
#53452
a3
Two extra white valves are included. Larger size flanges are separately available for
sale. To order replacement part or larger size flanges please call 800-292-4794 or
visit www.lansinoh.com/store for details.
a1
a2
a4
a5
Before Each Use…
●
Always wash hands thoroughly with soap and water before handling the
Breastmilk Expression Set, the pump body, or other attachments.
●
Disassemble the Breastmilk Expression Set to clean.
●
Set aside the tubing as it does not need to be washed or sterilized.
●
Ensure that the tubing is free of any liquid or moisture. Do not operate the pump
if liquid or moisture is visible in the tubing.
Cleaning Instructions
Unless otherwise instructed by your healthcare provider, follow these sanitizing and
cleaning instructions.
Sanitization
1. Prior to using the set for the first time, disassemble and boil all parts of the
Breastmilk Expression Set that come into contact with breastmilk for 10 minutes.
●
Note: Ensure you use enough water to keep parts afloat while boiling.
●
Note: Do not boil the tubing and tubing connector.
2. Remove all parts from water immediately after boiling, using caution as parts will
be hot.
3. Completely air dry before assembly and next use.
●
Note: Partially dried parts may affect operation of the pump.
Please ensure parts are completely dry before use.
Cleaning
●
Set aside the tubing and tubing connector. These items do not need to be
washed or sanitized because the diaphragm prevents them from coming into
contact with the breastmilk.
●
The breast flange and containers may be cleaned in the upper compartment of
your dishwasher or hand washed with dish soap in hot water. For best results,
we recommend using a baby bottle brush to clean the container and a baby
nipple brush to clean the insides of the breast flange. DO NOT use solvents or
abrasives. Rinse with hot, clean water.
●
All other parts of the Breastmilk Expression Set should be hand washed to pre-
vent loss and extend their usefulness.
●
To clean your breast pump, wipe the base with a damp cloth,
using only water or mild soap.
●
Do not wash or sterilize the tubing
or tubing connector.
●
Note: Before using the Breastmilk Expression Set, visually inspect the individual
components for cracks, chips, tears, discoloration or deterioration, as this
may affect the functionality of the Breastmilk Expression Set. Please visit
www.lansinoh.com/store or call 1-800-292-4794 for further guidance and
replacement parts.
●
Note: For best results, make sure the diaphragms are completely
dry before use.