Summary of 15.00.033
Page 1
Dvi fiberlynx pn 15.00.033 product manual november 2001 revision b.
Page 2
Lightwave communications dvi fiberlynx www.Lightwavecom.Com november 2001 2 lightwave communications, inc. 100 washington street milford, ct 06460 usa (800) 871-9838 • (203) 878-9838 • fax: (203) 874-0157 email: info@lightwavecom.Com • internet: www.Lightwavecom.Com lci asia/pacific postal address: ...
Page 3
Lightwave communications dvi fiberlynx www.Lightwavecom.Com november 2001 3 table of contents 1.0 system overview....................................................................................... 4 2.0 installation ...................................................................................
Page 4: 1.0 System
Lightwave communications dvi fiberlynx www.Lightwavecom.Com november 2001 4 1.0 system overview the dvi fiberlynx from lightwave communications is a fiber optic extension system for computers requiring high-resolution tmds-interface video for flat screen monitors and other digital high-resolution dv...
Page 5: 2.0 Installation
Lightwave communications dvi fiberlynx www.Lightwavecom.Com november 2001 5 the dvi fiberlynx system provides keyboard emulation and carries the keyboard and mouse signals through the transmitter to the receiver end. The personality modules must be used as a matched set (e.G., ps/2 on both ends, or ...
Page 6
Lightwave communications dvi fiberlynx www.Lightwavecom.Com november 2001 6 2.1 site preparation 1. Shutdown the cpu and disconnect the user peripherals (keyboard, mouse, monitor, etc.). 2. Move the cpu and the user devices to their respective operating locations. Standard cable kits provide 6 feet ...
Page 7
Lightwave communications dvi fiberlynx www.Lightwavecom.Com november 2001 7 (i.E., red on transmitter to red on receiver, blue to blue, green to green, etc.). Data out on the transmitter is connected to data in on the receiver, and vice-versa. Try to use the strand with the color indicated on the co...
Page 8
Lightwave communications dvi fiberlynx www.Lightwavecom.Com november 2001 8 2.3 dvi cable kits a six-foot-long dvi cable kit is included with the dvi fiberlynx to connect the dvi transmitter to your cpu. Use this kit at the cpu end. The cable kits include: one male-to-male tmds (dvi-d connector) vid...
Page 9
Lightwave communications dvi fiberlynx www.Lightwavecom.Com november 2001 9 4. Connect the digital video output of the cpu to the dvi in connector of the transmitter using the provided dvi-d cable. A monitor may be attached to the dvi out connector to view the video output of the cpu locally. Note: ...
Page 10
Lightwave communications dvi fiberlynx www.Lightwavecom.Com november 2001 10 2.4 connecting the user peripherals 1. Place the dvi fiberlynx receiver on or near the user station. 2. Connect the monitor to the dvi fiberlynx receiver. The left-most dvi connector (dvi out) is the primary video connector...
Page 11
Lightwave communications dvi fiberlynx www.Lightwavecom.Com november 2001 11 dvi fiberlynx receiver, audio, serial and ps/2 connections 5. Connect the receiver to ac power and turn on the switch. The status leds found on the front of the unit should light. The monitor and the cpu may be powered up a...
Page 12: 3.0 Operation
Lightwave communications dvi fiberlynx www.Lightwavecom.Com november 2001 12 3.0 operation once the cpu is operating, the dvi fiberlynx is transparent to the user. It will appear as though the user peripherals are directly attached to the cpu. There are no user adjustments relating to the dvi fiberl...
Page 13
Lightwave communications dvi fiberlynx www.Lightwavecom.Com november 2001 13 the dvi fiberlynx receiver has six front panel leds which show status of the receiver plus the status of the red, green, blue and sync. Clock. Normal 'good' indication is the two left-most leds flashing green, the other led...
Page 14
Lightwave communications dvi fiberlynx www.Lightwavecom.Com november 2001 14 the leds on the transmitter, from left to right, are 'unit receive and 'unit transmit'. Transmitter unit label appearance status action rxd blinking green normal solid green unit not receiving data • check fiber connections...
Page 15: Appendix A
Lightwave communications dvi fiberlynx www.Lightwavecom.Com november 2001 15 appendix a serial port pinouts db9 female 4 7 2 3 9 8 6 1 5 db9 male 2 8 4 3 6 7 9 5 1 transmitter serial connector receiver serial connector 1 - data carrier detect (dcd) 2 - receive data (rxd) 3 - transmit data (txd) 4 - ...
Page 16
Lightwave communications dvi fiberlynx www.Lightwavecom.Com november 2001 16 appendix b specifications b.1 physical width: 16.25 inches (41.2 cm) depth: 13.38 inches (34.0 cm) height: 1.75 inches (4.4 cm) shipping weight: 20 pounds (9.1 kg) b.2 environmental operating temperature: 32°f (0°c) to 122°...
Page 17
Lightwave communications dvi fiberlynx www.Lightwavecom.Com november 2001 17 b.5 interface b.5.1 video connector: dvi-d, female, digital-only, 29 pin vesa display data channel: ddc2b sync format: digital (hsync and vsync encoded in signal) minimum resolution 640 x 480 @ 60 hz (vga) typical resolutio...
Page 18
Lightwave communications dvi fiberlynx www.Lightwavecom.Com november 2001 18 b.6 compliance and certification class 1 laser product the dvi fiberlynx has been classified a class 1 laser product in accordance with standards iec 60825-1 and iec 60825-2. Always operate the product in accordance with th...