Lantronix Device Installer User Manual - page 16
Firmware Upgrades
14
Note:
Green indicates a successful installation; blue indicates that the IP address has
changed.
Upgrade Using an Existing Installation File
To use this option, there must be a pre-existing installation (.lxi) file.
To upgrade the firmware on a device:
1. Select the device in the device list.
Note:
To upgrade multiple devices of the same type and firmware with the same file,
select the devices from the device list.
2. Select
Upgrade
from the
Device
menu
or click the
Upgrade
icon
. The device
upgrade Wizard window displays.
3. To upgrade using an existing installation file, select
Use a specific Installation file.
4. Click
Browse
to open the Select Installation File window. Locate the correct Lantronix
Installer file (.lxi) and click
Open
to set the file location path in the Device Upgrade
Wizard window.
5. Click
Next
to proceed with the upgrade. The Device Upgrade Wizard window displays the
status and result of the upgrade.
Note:
Green indicates a successful installation; blue indicates that the IP address has
changed.
6. When the upgrade is complete, click
Close
to exit.
Setup Records
Save Setup Records
You can save setup records for updating regions of flash memory on the unit. This option is not
enabled if the device does not support this capability.
To save setup records:
1. On the device list, select the device.
2. On
the
File
menu, select
Save Setup Records
. The Save Setup Records window
displays.
3. Select as many records as desired and click
Save
. The Save As window displays. Some
setup records are unavailable.
4. Save the setup record and name it as desired. (You must save the records one at a
time.)
View Setup Record
You can view the contents of a setup record.
To view a setup record:
1. From
the
View
menu, select
Setup Record File
.
2. Browse and select the desired setup record. The setup record displays.