Lantronix MatchPort AR Integration Manual - page 16
2:Description and Specifications
MatchPort AR™ Integration Guide
16
Specifications
Table 2-5. Specifications
Category
MatchPort AR
CPU
Lantronix DSTni-FX 32-bit Microprocessor, 166 MHz internal
bus, 83 MHz external bus
Memory
4 Mbits Flash and 8 Mbits SDRAM, and can be expanded.
Please contact your Lantronix sales representative if you need
higher memory densities.
Firmware
Upgradeable via TFTP and FTP
Configuration Pins
Up to 7 pins if no DTR or DCD is used on serial ports.
Reset Circuit
RESETIN# is low active and push-button type. Minimum RESETIN#
pulse width is 2 ms at IIL = -500 µA. Reset is also triggered if 3.3V at
pin P1.37 drops below 2.93V typically.
Serial Interface
CMOS (Asynchronous) 3.3V - level signals
Speed software selectable and customizable (300 bps to 230400 bps)
Serial Line Formats
7 or 8 data bits, 1-2 Stop bits, Parity: odd, even, none
Modem Control
DTR, DCD using CPs
Flow Control
XON/XOFF (software), CTS/RTS (hardware), none
Network Interface
Ethernet 10/100 base TX with Auto Negotiation, and HP Auto MDIX
Protocols Supported
ARP, UDP, TCP, Telnet, ICMP, SNMP, DHCP, BOOTP, Auto IP,
HTTP, HTTPS, SMTP, TFTP, FTP
Management
Internal web server, SNMP
Serial login, Telnet login, DeviceInstaller software, SSH
Internal Web Server
Serves web pages
WEB storage capacity: approx. 1MB
Security
Password protection, locking features
Average Power
Consumption (at
3.3V)
0.67W
Weight
1 Oz (28 g)
Cover Material
ABS
Temperature
Operating range: -40°C to +70°C (-40°F to +158°F)
Storage range: -40°C to +85°C (-40°F to 185°F)
Warranty 2-year
limited
warranty
Included Software
Windows™ 98/NT/2000/XP-based Device Installer configuration
software and Windows™-based Com Port Redirector and Secure Com
Port Redirector, DeviceInstaller, and Web-Manager.