Part number 900-587 revision c december 2015 micro125 embedded device server integration guide.
Micro125 embedded device server integration guide 2 copyright and trademark © 2015 lantronix, inc. All rights reserved. No part of the contents of this publication may be transmitted or reproduced in any form or by any means without the written permission of lantronix. Printed in the united states o...
Micro125 embedded device server integration guide 3 contents copyright and trademark ............................................................................................. 2 contacts .................................................................................................................
Micro125 embedded device server integration guide 4 list of figures figure 2-1 micro125 board layout ............................................................................................................... 8 figure 2-2 micro125 top view ...........................................................
Micro125 embedded device server integration guide 5 1: introduction embedded integration kits the embedded integration kit provides a simple method of evaluating our micro125 embedded device server. This product allows software engineers to test our device servers with their products prior to the ha...
1: introduction micro125 embedded device server integration guide 6 chapter summaries the remaining chapters in this guide include: chapter description 2: description and specifications describes and provides information about the micro125 device server. 3: integration guidelines provides general gu...
Micro125 embedded device server integration guide 7 2: description and specifications the micro125 embedded device server provides an integrated solution to add proven ethernet connectivity to an existing design quickly and economically, and with a high level of flexibility. The micro125 the micro12...
2: description and specifications micro125 embedded device server integration guide 8 layout and dimensions the micro125 integrates into products quickly and easily. Serial interfacing is accomplished via a ttl connector, and for ethernet access, an optional rj45 (10/100base-t) connector is availabl...
2: description and specifications micro125 embedded device server integration guide 9 the following drawing shows the connector end view of the board with the leds and rj45 connector installed. The drawing on the right shows the dimensions for con1 (dil 2 x 6). Figure 2-3 micro125 connector end view...
2: description and specifications micro125 embedded device server integration guide 10 table 2-1 micro125 connector pinouts con1 ttl serial port (dil 2 x 6 pins) con2 10/100base-t (rj45) connector con3 (2 x 2 pins in place of rj45) con4 (2 x 4 pins in place of leds) pin signal pin signal pin signal ...
2: description and specifications micro125 embedded device server integration guide 11 status leds the micro125 carrier board has four status leds: serial port (channel) 1 status, serial port (channel) 2 status, diagnostics, and network link status. See the following table for a complete description...
2: description and specifications micro125 embedded device server integration guide 12 product information label the product information label contains important information about your specific unit, such as its product number, revision number, manufacturing date and mac address. Figure 2-7 product ...
2: description and specifications micro125 embedded device server integration guide 13 category description storage temperature range: -40° to 85°c (-40° to 185°f) emissions compliance fcc part 15 subpart b industry canada ices-003 issue 4 february 2004 cispr 22: 2005 information technology equipmen...
Micro125 embedded device server integration guide 14 3: integration guidelines this chapter provides general guidelines to integrate the micro125 board into your design, and help you reach the necessary standards for your applications. Power supply the micro125 runs at 5 vdc nominal, ±5%. The curren...
3: integration guidelines micro125 embedded device server integration guide 15 figure 3-1 multi-layer board strategy virtual ground the device server provides a virtual ground at a (plated) mounting hole. It is a ground imitation. It uses the tap of two capacitors (ceramic 0.1 μf) conducted symmetri...
Micro125 embedded device server integration guide 16 4: test bed the micro125 embedded integration kit includes a test bed (carrier board) that provides serial connections to the device server. The micro125 device server provides a network 10/100base-t rj45. The test bed contains a power led, ttl to...
A: compliance and warranty information micro125 embedded device server integration guide 17 figure 4-2 pin configurations test bed connectors the micro125 test bed has four connectors: con1 (serial port 1 or channel 1), con2 (ttl interface), con4 (serial port 2 or channel 2), and con3, which is a 5v...
Micro125 embedded device server integration guide 18 a: compliance and warranty information compliance information (according to iso/iec guide 22 and en 45014) manufacturer’s name & address lantronix 167 technology drive, irvine, ca 92618 usa declares that the following product: product name model: ...
A: compliance and warranty information micro125 embedded device server integration guide 19 rohs notice all lantronix products in the following families are china rohs-compliant and free of the following hazardous substances and elements: • lead (pb) • mercury (hg) • polybrominated biphenyls (pbb) •...