Lantronix Xpress-Pro SW 92000 Quick Installation Manual - page 3
Other manuals for Xpress-Pro SW 92000:
User Manual
Manual is about: Lantronix Xpress-Pro SW 92000: User Guide
of
3
3
Assembly, Startup, and Dismantling
Assembly: Place the switch on the
DIN rail from above using the slot.
Push the front of the switch toward the
mounting surface until it audibly snaps
into place.
Startup: Connect the supply voltage
to start up the switch via the terminal
block (or DC JACK).
Dismantling: Pull out the lower edge
and then remove the switch from the
DIN rail.